User Friendly Programmable Thermal Shock Test Chamber
Main features of Thermal test chamber:
1. Programmable Controller with RS232C, 7 LCD touch panel control
2. Stainess steel Interior, galvanized steel sheet exterior
3.2PCS stainless steel loading shelves free
4. Multipane viewing window with heater
5. 50mm diameter feed-through port
6. Floor stand with castors.
Main parts imported: Tecumseh, Danfoss, Bitzer, siginomiya, ALCO,
Top-grade raw material insure the reliability performance
Excellent design bring you good user experiences
Brief introduction of User friendly Programmable Thermal Shock Test
The equipment is mainly designed according to the national standard
and user-defined requirements. It can simulate different
environmental conditions, such as heat-endurance, cold-endurance,
dryness-endurance, and humidity-endurance, which defines the
performance of material. By testing the product under different
environmental conditions to see whether its performance can meet
the intended requirements. It is widely applied in the industries
of electronics, electrical equipment, vehicle, metal, foodstuffs,
chemistry, building materials, luggage, adhesion tape, printing,
packaging, and other product components and materials
Thermal Shock Test Chamber is used to quickly find the hidden
mechanical weaknesses in electronic components when test specimens
are exposed to rapid thermal shock condition, and you will not only
reduce the premature failures but also increase the reliability of
your products when you choose our thermal shock test chamber.
1.3-zone design: High temperature zone, cold temperature zone, and
2. The test specimens under test are stationary in the testing
3. Touch-control operation interface for ease of use.
4. Max. 999H and max. 9999 cycles for high or low temperature shock
for thermal shock test chamber.
5. Automatic cycling shock or/and manual selective shock are
6. Water cooled, binary cooling system for quick cooling effect.
Knowledge of theemal shock chamber:
Thermal shock test is a method of environmental testing that
subjects a product to alternating extremes of high and low
temperatures. Thermal shock testing allows for the observation of
changes in product characteristics and failure occurrence caused by
different materials and their thermal expansion coefficients. A
thermal gradient difference in the different parts of the object
expands by different amounts and can cause cracking and failure.
KOMEG brand thermal shock and thermal stress chambers have been
designed to operate in accordance with reliability programs,
quality control, and commercial test programs and military test.
KOMEG offers several configurations of thermal shock chambers
capable of meeting a wide variety of testing needs.
Vertical, two zone chamber has hot and cold zones that can be
Horizontal, three zone thermal shock chamber utilizes controlled
areas for hot, ambient and cold temperatures.
Double duty thermal shock chambers from KOMEG are designed with hot
zones above and below the cold zone and a two compartment product
carrier that simultaneously moves products between the hot and cold
Warranty: One year free warranty for whole set machine, lifelong
After-sale service: Feedback within 2 hours after get the call.
Service: OEM service, Design service, Buyer lable service.
Your attention will be highly appreciated.
We supply 7*24 hours service.
|Low Temp. chamber||-70ºC~-10ºC|
|Pre-cooling time||+20ºC~-70ºC ,Within 60 min|
|High Temp. chamber||+60ºC~+200ºC|
|Pre-heating time||+60ºC~+200ºC ,Within 20 min|
|Recovery time||High-Temp Exposure 30 min|
|Low-Temp Exposure 30 min|
|Recovery time within 5 min|
|Safety device||No fuse breaker, over pressureover heat and over current protection
for compressor,over temperature protection, over load protection
for blower, dry heat protection|
|Standard accessory||Cable port(portΦ50mm)*1, shelves*2|
|Interior material||Stainless steel plate(SUS 304)|
|Exterior material||Baked painting steel or stainless steel(SUS304)|
|Insulation material||Rigid polyurethane Foam+glass fiber wool|
|Refrigeration system||Water Cooled|
|Semi-hermetic compressor, cascade refrigeration system, CFC free
refrigerant(HFC-507 and HFC-23)|
|Controller||Panel:7-inch LCD Touch panel,Chinese or English display selectable|
|Operation model:Program or fix point running|
|Memory capacity:120programs,1200steps,all repeat 999cycles,part
repeat 99 cycles.|
|Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit|
|Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV|
|Power||AC 380±10%50Hz ,3 phase 4 wires +Ground Wires|
|Note:1. We reserve the right to change specifications without prior
notice 2. Customized sizes and configurations available|